Note: The lens with the SunGod engraving is the right lens (as you wear them). Fitting the lens into the incorrect side may lead to damage of your frame and will affect optical performance. To insert the lenses follow these steps:
- Changing your Snipers™ Lens
Step 1: Remove the Lens from the Frame by pulling away at the mid-point above the "SunGod" engraving and then from the bottom half of the frame.
Step 2: Insert the new lens into one side first, securing at the two attachment points at the top and bottom of the frame.
Step 3: Insert the other side of the lens, again securing at the attachment points at the top and bottom of the frame.
- Changing your Snipers™ Strap
Step 1: To avoid damaging the inside of the Lens, always remove the Lens from the Frame before changing the Strap.
Step 2: From the outside, press the buckle of the Strap towards the inside of the Frame to release it.
Step 3: Twist and thread the strap through the hole in the Frame. Repeat on the other side.
Didn't find an answer to your question?CONTACT US