Note: The lens with the SunGod engraving is the right lens (as you wear them). Fitting the lens into the incorrect side may lead to damage of your frame and will affect optical performance. To insert the lenses follow these steps:
- Changing your Snipers™ Lens
Step 1: Remove the Lens from the Frame by pulling away at the mid-point above the "SunGod" engraving and then from the bottom half of the frame.
Step 2: Insert the new lens into one side first, securing at the two attachment points at the top and bottom of the frame.
Step 3: Insert the other side of the lens, again securing at the attachment points at the top and bottom of the frame.
Step 4: Finally fix press the frame along the top and around the nose to ensure the lens is securely inserted.
Step 5: Store your spare lens in the provided 100% microfibre pouch.Did we answer your question?
- Changing your Snipers™ Strap
Step 1: To avoid damaging the inside of the Lens, always remove the Lens from the Frame before changing the Strap.
Step 2: From the outside, press the buckle of the Strap towards the inside of the Frame to release it.
Step 3: Twist and thread the strap through the hole in the Frame. Repeat on the other side.
Step 4: Identify the left side of the Strap by the marking on the inside of the buckle. Thread this through the left side (as you wear them) of the Frame.
Step 5: Pull the Strap, you will hear a click as it clips into place. Repeat on the other side.Did we answer your question?
- Snipers™ Lens Kits
You can find replacement Lens Kits for all SunGod products, including Snipers™, here.Did we answer your question?
Didn't find an answer to your question?Contact Us